Customer’s Own Material (COM) Program
Request a COM
COM Request Guidelines – Haworth Health – Upholstery
Please review the Manufacturing Constraints listed below prior to selecting an upholstery.
- Upholstery must be backed
- Leather is not approved as a COL
- COMs are not available on Encompass Exam Tables and Stools
COM Form: 1a) COM Quick Code
We are excited about this new form and we hope you are too.
- Use this form to add colors to a previously approved Pattern.
- Product availability is as shown on the website.
- You can select from the following options: Haworth Health – Upholstery, and as a bonus, Haworth Seating – Upholstery, and Haworth - Vertical Fabric are on the same form.
- Order Entry Codes will be emailed to you within 24 hours.
COM Form: 1d) COM – Haworth Health – Upholstery Request
Test Type: Memo Sample Testing - Haworth will acquire Memo Samples for testing.
Product Selection: The following products will be tested with this request selection.
- Archdale™, Conover™, Danbury™ Collection, Dover™, Gates™, Saluda™, Selma™, Spinnaker™, Wright™
- If your COM request is approved, an Order Entry Code will be emailed to you within 3 business days upon the receipt of the memo sample.
Test Type: Yardage Required Testing - Dealer to Supply Required Yardage for testing.
Product Selection and yardage requirements: The following products will be tested with this request.
- Atwell Chairs & Lounge (4 yards)
- Results for the Atwell Lounge may exclude the approval for the Base and Arms
Send the required yardage to the following address and reference your COM Service Request Ticket Number on the packing slip.
COM Department, Haworth Inc, One Haworth Center, Holland MI 49423
Test results will be emailed to you within 10 business days upon the receipt of the required yardage. If your COM request is approved, an Order Entry Code will be provided with the test results.
Additional Notes
- A Graded-In Order Entry Code will be provided, no additional charges apply.
- Production material will be procured by Haworth.
- Orders with COM upholstery will be scheduled at standard production lead-time. However, an extended lead-time may apply based on the availability of the COM.
Vertical Fabrics
COM Request Guidelines – Vertical Fabrics
Please review the Manufacturing Constraints below prior to selecting a fabric.
- Fabrics which are not Fire Compliant will have limited product application
- Vertical fabrics are normally 66” in width. There may be product size restrictions if requesting fabrics less than 66” wide. (Railroading the fabric is an option, however a different Order Entry/Color Code is required)
- Fabrics that reference Polyolefin or Xorel in their content or fabrics treated with Stain Repellents will not be approve due to performance reasons.
COM Form: 1a) COM Quick Code
We are excited about this new form and we hope you are too.
- Use this form to add colors to a previously approved Pattern.
- Product availability is as shown on the website.
- You can select from the following options: Haworth - Vertical Fabric, and as a bonus, Haworth – Seating Upholstery, and Haworth Health – Upholstery.
- Order Entry Codes will be emailed to you within 24 hours.
COM Form: 1c) COM – Vertical Fabrics Request
Test Type: Yardage Required Testing - Dealer to Supply Required Yardage for Testing.
Product Selection and yardage requirements: Only one product test is allowed per request for the following products.
- Adaptable Radius Steel Flipper Doors (1.5 yards)
- Belong, Hop, Intuity, Planes Screens & Planes Modesty Panels (1 yard)
- Compose Tiles, PREMISE Stack pad & Workware (1.5 yards)
- Patterns Privacy Sceens (2 yards)
- Tackboards & Tackstrips (1.5 yards)
- UniGroup Flipper Doors & PREMISE Floor-to-Ceiling (1.5 yards)
- UniGroup Too Insert (1 yard)
- UniGroup, UniGroup too, Places, Monolithic Panels & Finish Posts (6 yards)
- Wainscot Kits (1.5 yards)
Send the required yardage to the following address and reference your COM Service Request Ticket Number on the packing slip.
COM Department, Haworth Inc, One Haworth Center, Holland MI 494213
Test results will be emailed to you within 10 business days upon the receipt of the required yardage. If your COM request is approved, an Order Entry Code will be provided with the test results.
Additional Notes
- A Graded-In Order Entry Code will be provided, no additional charges apply. *Exception: If a fabric cost exceeds the range of our highest grade the code will be set-up as Non-Graded, additional charges apply. (see Textile Price Categories to learn more)
- Production material will be procured by Haworth.
- Orders with COM upholstery will be scheduled at standard production lead-time. However, an extended lead-time may apply based on the availability of the COM.
Haworth Health – Upholstery
COM Request Guidelines – Haworth Health – Upholstery
Please review the Manufacturing Constraints listed below prior to selecting an upholstery.
- Upholstery must be backed
- Leather is not approved as a COL
- COMs are not available on Encompass Exam Tables and Stools
COM Form: 1a) COM Quick Code
We are excited about this new form and we hope you are too.
- Use this form to add colors to a previously approved Pattern.
- Product availability is as shown on the website.
- You can select from the following options: Haworth Health – Upholstery, and as a bonus, Haworth Seating – Upholstery, and Haworth - Vertical Fabric are on the same form.
Order Entry Codes will be emailed to you within 24 hours.
COM Form: 1d) COM – Haworth Health – Upholstery Request
Test Type: Memo Sample Testing - Haworth will acquire Memo Samples for testing.
Product Selection: The following products will be tested with this request selection.
- Archdale™, Conover™, Danbury™ Collection, Dover™, Gates™, Saluda™, Selma™, Spinnaker™, Wright™
- If your COM request is approved, an Order Entry Code will be emailed to you within 3 business days upon the receipt of the memo sample.
Test Type: Yardage Required Testing - Dealer to Supply Required Yardage for testing.
Product Selection and yardage requirements: The following products will be tested with this request.
- Atwell Chairs & Lounge (4 yards)
- Results for the Atwell Lounge may exclude the approval for the Base and Arms
Send the required yardage to the following address and reference your COM Service Request Ticket Number on the packing slip.
COM Department, Haworth Inc, One Haworth Center, Holland MI 49423
Test results will be emailed to you within 10 business days upon the receipt of the required yardage. If your COM request is approved, an Order Entry Code will be provided with the test results.
Additional Notes
- A Graded-In Order Entry Code will be provided, no additional charges apply.
- Production material will be procured by Haworth.
- Orders with COM upholstery will be scheduled at standard production lead-time. However, an extended lead-time may apply based on the availability of the COM.
Wall Covering
COM Request Guidelines – Wall Covering Request
Please review the Manufacturing Constraints below prior to selecting a wall covering.
- Backing is required for prevention of glue bleed thru
- Material width not to exceed 54”
COM Form: 1e) COM Wall Covering Request
Test Type: Yardage Required Testing - Dealer to Supply material for testing.
- Each color may require full testing.
- If a pattern is approved requests for additional colors will be reviewed with a memo sample to determine if twelve (12) yards are required for additional testing.
Product Selection and yardage requirements: The following products will be tested with this request.
- Enclose ®, Enclose ® FG, Trivati ® (12 yards)
Send the required yardage to the following address and reference your COM Service Request Ticket Number on the packing slip.
COM Department, Haworth Inc, One Haworth Center, Holland MI 49423
Test results will be emailed to you within 10 business days upon the receipt of the required yardage. If your COM request is approved, an Order Entry Code will be provided with the test results.
Additional Notes
- Production material will be procured by Haworth.
- Orders with COM wall covering will be scheduled at standard production lead-time. However, an extended lead-time may apply based on the availability of the COM.
Laminate
COM Request Guidelines – Laminate
Please review the Manufacturing Constraints below prior to selecting a laminate.
- Sheets must be available in 60” widths
- Laminate must have a standard thickness of .028 (vertical grade)
- Finish must be matte or low-gloss, as high gloss finishes are highly susceptible to scratching during the manufacturing process
- Laminates shipped standard with a protective coating (peel coat) are not allowed
- Directional laminates are not available on Compose Spanning Tiles (ex: Wood Grain)
- When specifying a COM laminate, you must select a standard Haworth edge color, matching edgebands are not available
COM Form: 1f) COM Laminate Request - Dealer to Supply two (2) sample chips for evaluation
Product Selection Groupings:
- Furniture and Walls
- Compose Spanning Tiles - Directional laminates are not available on these tiles (ex: Wood Grain)
- Seating Tablets
Send the test samples to the following address and reference your COM Service Request Ticket Number on the packing slip.
COM Department, Haworth Inc, One Haworth Center, Holland MI 49423
Test results will be emailed to you within 10 business days upon the receipt of the required test samples. If your COM request is approved, an Order Entry Code will be provided with the test results.
Additional Notes
- Production material will be procured by Haworth.
- Orders with COM wall covering will be scheduled at standard production lead-time. However, an extended lead-time may apply based on the availability of the COM
Paint on Metal
Paint on Metal
Please review the Manufacturing Constraints below prior to requesting a custom paint on metal.
- Custom colors are supplied in standard gloss and finish.
- Custom metallic and textured finishes are not available.
- Custom paint is not available on plastic parts.
h) COM Paint on Metal Request